Clutch problems

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

REBROKER - 10 Feb 2007 02:22 GMT

I really need some help. Pulled in the driveway one day and the clutch pedal
went all the way to the floor - have since, replaced clutch Master as well as
Slave, tried to bleed and STILL am unable to build any pressure. Please
advise. Thanks Larry

Reply to this Message

William Noble - 10 Feb 2007 03:52 GMT

you haven't bled it successfully - spend $35 and buy a pressure bleeder for
that car and all will be well
it's nearly impossible to bleed it without a pressure bleeder.

>I really need some help. Pulled in the driveway one day and the clutch
>pedal
> went all the way to the floor - have since, replaced clutch Master as well
> as
> Slave, tried to bleed and STILL am unable to build any pressure. Please
> advise. Thanks Larry

Signature

Posted via a free Usenet account from http://www.teranews.com

Reply to this Message

REBROKER - 14 Feb 2007 19:36 GMT

William Thanks for the response - Bleeding wasn't the problem. In fact it
comes about that wasn't the problem at all - apparently there was
insufficient fluid coming from the reservoir to the line - I had a Mechanic
drill a couple of holes in the rear to front of the reservoir and it worked
fine. Go figure, Huh?. Once again Thanks Larry

>you haven't bled it successfully - spend $35 and buy a pressure bleeder for
>that car and all will be well
[quoted text clipped - 6 lines]
>> Slave, tried to bleed and STILL am unable to build any pressure. Please
>> advise. Thanks Larry

Reply to this Message