Reference Mark Sensor on Flywheel

Thread view:

Thread rating:

brad12 - 17 Dec 2003 03:51 GMT

Does anyone know where I can get the procedure for replacing a reference mark sensor on the flywheel.

Bring back NotABando - 18 Dec 2003 04:32 GMT

Simple.

Remove old allen set screw.
Insert new allen set screw with a bit of medium loctite and set to 5 mm
high.

> Does anyone know where I can get the procedure for replacing a reference mark sensor on the flywheel.

DCorley - 18 Dec 2003 05:27 GMT

he is talking about the sensor itself, not the setscrew in the flywheel...

> Simple.
>
[quoted text clipped - 5 lines]
>
> mark sensor on the flywheel.

Bring back NotABando - 19 Dec 2003 00:25 GMT

Whoops, Saw the on the flywheel and assumed he whacked the set screw.

Here is the place http://www.clarks-garage.com

G' luck,
Bob

> he is talking about the sensor itself, not the setscrew in the flywheel...
>
[quoted text clipped - 7 lines]
> >
> > mark sensor on the flywheel.