> Does it cut out if you have it on the max setting? The problem may be
> with the resistor bridge that controls fan speed.
>
> Kevin
> Catellus Engineering
If I use the demist button, which gives maximum delivery to the screen using
the fan, the fan cuts out after a few seconds, so your theory could be
right, thanks. Any advice on how / how easy it is to rectify the problem,
please?!
Myles
William B Noble (don't reply to this address) - 16 Dec 2005 04:48 GMT
on my 85.5, I had this problem, a swift kick to the wire bundle under
the "central electronics" unit would cure it - the copper strips in
that unit get oxidized and then cause intermittant connections -
>> Does it cut out if you have it on the max setting? The problem may be
>> with the resistor bridge that controls fan speed.
[quoted text clipped - 8 lines]
>
>Myles
Bill
www.wbnoble.com
to contact me, do not reply to this message,
instead correct this address and use it
will iam_ b_ No ble at msn daught com