Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Driving, Maintenance, Tuning / RVs / November 2006

Tip: Looking for answers? Try searching our database.

Jacking up a camper

Thread view: 
Enable EMail Alerts  Start New Thread
Thread rating: 
KidThrifty - 01 Nov 2006 05:32 GMT
Some of you already know that I need to do some brakework on my camper.
What is the best and safest way to jack it up without messing anything up or
bending the axel?
Thanks
Calif Bill - 01 Nov 2006 05:43 GMT
> Some of you already know that I need to do some brakework on my camper.
> What is the best and safest way to jack it up without messing anything up
> or bending the axel?
> Thanks

I jack my boat trailer under the ubolts connecting the axel to the spring.
Jonathan - 01 Nov 2006 17:50 GMT
Greetings,

I agree with the reply below, but also use two jackstands per side, one each
placed where the leaf spring is mounted to the frame in front of and behind
the wheel.  Never trust a hydraulic jack to bear the full load when working
on, near or underneath any raised vehicle.

Cheers - Jonathan

>> Some of you already know that I need to do some brakework on my camper.
>> What is the best and safest way to jack it up without messing anything up
>> or bending the axel?
>> Thanks
>
> I jack my boat trailer under the ubolts connecting the axel to the spring.
AustinMN - 01 Nov 2006 15:54 GMT
> Some of you already know that I need to do some brakework on my camper.
> What is the best and safest way to jack it up without messing anything up or
> bending the axel?
> Thanks

I usually use a hydraulic jack on the frame right behind where the leaf
spring is attached.  If I will be working under the trailer (such as
adjusting the brakes), I will them place one jack stand behind that
(but as close as I can get to the hydraulic jack) and another in front
of the front spring mount.

If you jack from in front of the axle, you may find you are in front of
the center of gravity, and end up jacking the tongue up instead of the
axle! ;-)

Never trust your life to a hydraulic jack.  Never trust your life to a
single jack stand.

Austin
Mark F. - 06 Nov 2006 04:16 GMT
Use Wheel chalks under the tire that is not lifted also...

>> Some of you already know that I need to do some brakework on my camper.
>> What is the best and safest way to jack it up without messing anything up
[quoted text clipped - 16 lines]
>
> Austin
Tomes - 07 Nov 2006 00:23 GMT
Chocks.  Chalk is much too crumbly...
Tomes

> Use Wheel chalks under the tire that is not lifted also...
>
[quoted text clipped - 18 lines]
>>
>> Austin
Mark F. - 07 Nov 2006 00:58 GMT
I stand corrected.

> Chocks.  Chalk is much too crumbly...
> Tomes
[quoted text clipped - 21 lines]
>>>
>>> Austin
Wesley - 16 Nov 2006 02:50 GMT
You mean you type on your computer standing up?  ;-)  Sorry...couldn't
resist...

Wesley

> I stand corrected.
>
> > Chocks.  Chalk is much too crumbly...
> > Tomes
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread
Enable EMail Alerts
Rate this Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.