Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Driving, Maintenance, Tuning / RVs / November 2005

Tip: Looking for answers? Try searching our database.

Is there a formula for Inverter output voltage , to actual ?

Thread view: 
Enable EMail Alerts  Start New Thread
Thread rating: 
Dave in Lake Villa - 04 Nov 2005 00:50 GMT
With a modified sine type of Inverter like the compact kind that you can
get at Menards for approx. $79,  it puts out a voltage of about 90
volts.  Is there a formula for this that tells you what the 'actual'
voltage is at the product youre powering ?   IE : Does 90 Inverter
output volts, equal 120 v. ?  

Thanks.
TheSnoMan - 04 Nov 2005 01:50 GMT
> With a modified sine type of Inverter like the compact kind that you can
> get at Menards for approx. $79,  it puts out a voltage of about 90
[quoted text clipped - 3 lines]
>
> Thanks.

 Good question as I have never put a volt meter on on. Regular wall
current is sinewave and the typical metter reads the average voltage,
not the peak to peak and there are time in the cycle than voltage is a
lot less than 120. What I am trying to say is tat your meter may be
having trouble with the inverters modified square wave output. If a
device works properly attached to it, do not give it another though. I
have nbeen using some for manys years now and never metered the first
one and now you have got me curious. Alsoyou want to manitain good
supply voltage to it because output will drop if input voltage drops much.

Signature

-----------------
www.thesnoman.com

D.J. Osborn - 04 Nov 2005 01:50 GMT
> With a modified sine type of Inverter like the compact kind that you can
> get at Menards for approx. $79,  it puts out a voltage of about 90
> volts.  Is there a formula for this that tells you what the 'actual'
> voltage is at the product youre powering ?   IE : Does 90 Inverter
> output volts, equal 120 v. ?

From where did you get your 90 Volt value?

Signature

D.J., N8DO; FMCA 147762
dj[underscore]osborn at yahoo dot com

No-One - 04 Nov 2005 03:50 GMT
Measure this with a True RMS volt meter ... because of the modified sine
wave a regular averaging volt meter may be fooled & show you a lower
voltage.

JJS

> With a modified sine type of Inverter like the compact kind that you can
> get at Menards for approx. $79,  it puts out a voltage of about 90
[quoted text clipped - 3 lines]
>
> Thanks.
TheSnoMan - 04 Nov 2005 04:22 GMT
> Measure this with a True RMS volt meter ... because of the modified sine
> wave a regular averaging volt meter may be fooled & show you a lower
[quoted text clipped - 8 lines]
>> output volts, equal 120 v. ?
>> Thanks.

Just for the heck of it I measure one of my inverters after reading this
and it was 120.2 volts but it was with a high dollar fluke DVM too.

Signature

-----------------
www.thesnoman.com

Dave in Lake Villa - 04 Nov 2005 13:30 GMT
I measured the output of my 700 w. Inverter with a $150 meter and i get
90 volts . Incoming to the Inverter is 12.9 vdc.
TheSnoMan - 04 Nov 2005 13:51 GMT
> I measured the output of my 700 w. Inverter with a $150 meter and i get
> 90 volts . Incoming to the Inverter is 12.9 vdc.

I do not think the inverter is bad, your DVM does not know how to read
it properly. A old analog meter would work better I think because wave
shape will have little effect on it.

Signature

-----------------
www.thesnoman.com

lgadbois - 04 Nov 2005 03:58 GMT
Dave,

Line voltage in most communities is about 120 volts alternating current. The
waveform is supposed to be a sine wave, and if measured on an oscilloscope
would measure a peak-to-peak value of 336 volts. (120 volts x 2.8 PEP
conversion factor) The 120 vac number is a RMS value (root mean square) and
will deliver the same power as 120 vdc (Volts Direct Current). Because an AC
voltmeter is designed to measure RMS voltage, it will not give an accurate
reading on the output of a square wave inverter.

The easiest way to check the output of an inverter is to load it to about
half it's rating, and compare the brightness of an incandescent bulb when
operating from the inverter as opposed to operating off "shore" power.

Good luck!

> With a modified sine type of Inverter like the compact kind that you can
> get at Menards for approx. $79,  it puts out a voltage of about 90
[quoted text clipped - 3 lines]
>
> Thanks.
HeatMan - 04 Nov 2005 15:04 GMT
He's back.

Watch your kids.

> With a modified sine type of Inverter like the compact kind that you can
> get at Menards for approx. $79,  it puts out a voltage of about 90
[quoted text clipped - 3 lines]
>
> Thanks.
dimwitted dave-he's back - 04 Nov 2005 16:31 GMT
Not to mention pets, farm animals and used sex
toys.......www.davesdildos.com
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread
Enable EMail Alerts
Rate this Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.