84 C900 - Fuel Issues Follow up

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

T - 07 Jan 2005 08:55 GMT

I didn't get a chance to do much today but we did turn up the Haynes manual.

It looks to be a faulty FP relay, I have a heavy guage jumper setup to
jump around it tomorrow.

Thx for the help everybody.

TBerk

Reply to this Message

Dave Hinz - 07 Jan 2005 15:17 GMT

> I didn't get a chance to do much today but we did turn up the Haynes manual.
>
> It looks to be a faulty FP relay, I have a heavy guage jumper setup to
> jump around it tomorrow.

OK, that's a reasonable temporary fix, but you'll probably want to
re-solder the board in the relay as James Sweet suggested first,
and replace it if that doesn't work.

Reply to this Message

T - 09 Jan 2005 16:37 GMT

>>I didn't get a chance to do much today but we did turn up the Haynes manual.
>>
[quoted text clipped - 4 lines]
> re-solder the board in the relay as James Sweet suggested first,
> and replace it if that doesn't work.

Which I did last night. I found the winding for the electromagnet had a
cold solder joint on the PCB.

I re tacked it, now to see if it works or not.

TBerk

Reply to this Message