 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
Car Forum / Saab Cars / May 20052000 9-3 brake job - anything to know?
Going to replace the pads on my newly purchased 2000 9-3. Never owed a Saab before and am wondering if there's anything special I should be aware of. Thanks! >Going to replace the pads on my newly purchased 2000 9-3. Never owed a Saab >before and am wondering if there's anything special I should be aware of. >Thanks! They're pretty un-remarkable calipers. Torque on the pin-bolts is 28Nm. They need a biggish allen-key (7mm I think, but it could be 8mm), so make sure you have one to fit your torque wrench before you bother to take the wheels off. Cheers, Colin (Who had to put the wheels back on to go and buy the sodding hex bit). |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2008 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.