Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Saab Cars / November 2005

Tip: Looking for answers? Try searching our database.

95 900 turbo Standard exhaust

Thread view: 
Enable EMail Alerts  Start New Thread
Thread rating: 
JoHNY - 17 Nov 2005 21:04 GMT
Wonder if anyone knows what the sandard pipe size is for this car?

Cheers
Dave Hinz - 17 Nov 2005 21:07 GMT
> Wonder if anyone knows what the sandard pipe size is for this car?

Country?  Continent?  Engine?

Just about to the back of the car is, of course, an accurate but useless
answer.
JoHNY - 17 Nov 2005 21:18 GMT
Well, it's a UK car with a 2L FPT engine.  I would ramp it up but it's
feckin freezin out there at the mo.  Just bought it so i don't know a
lot about it.

Ta
Dave Hinz - 17 Nov 2005 21:25 GMT
> Well, it's a UK car with a 2L FPT engine.  I would ramp it up but it's
> feckin freezin out there at the mo.  

Feh.  Freezing?  We had 2 inches of snow this morning, let me tell you
about _freezing_.

> Just bought it so i don't know a lot about it.

I just had a pretty full answer written and then noticed that my answer
was off by ten years and a major model change.  So I'll have to back out
at this point and apologize that I have no information for you on the
GM-900, it isn't in my area of experience.

Welcome to the group, by the way, if you haven't already been properly
welcomed.  Lots of good folks here who know a lot about a lot.
JoHNY - 17 Nov 2005 21:33 GMT
Cheers, thanx for the welcome.  I suppose this place is the beginning
of the slippery road toward unaffordable expensive performance mods.
Oh well, i hope my marriage survives?

John
Malt_Hound - 17 Nov 2005 21:41 GMT
> Cheers, thanx for the welcome.  I suppose this place is the beginning
> of the slippery road toward unaffordable expensive performance mods.
> Oh well, i hope my marriage survives?
>
> John

Actually, there are a bunch of us that are just into maintaining the
stock performance...  which is pretty darned good outta the box  ;-)

Signature

-Fred W

NeedforSwede2 - 17 Nov 2005 23:30 GMT
>Cheers, thanx for the welcome.  I suppose this place is the beginning
>of the slippery road toward unaffordable expensive performance mods.
>Oh well, i hope my marriage survives?
>
>John

Well, if you must and are OK with a Wrench it isn't bad.
Try www.partsforsaabs.com and www.elkparts.com

Both UK based, both sell BSR tuning packages.
Signature

Carl Robson
Car PC Build starts again. http://smallr.com/rz
Homepage: http://www.bouncing-czechs.com

John Arild Berentsen - 18 Nov 2005 17:14 GMT
Your exhaust pipe i 2 1/4 inch diameter from turbo to back of car.

Brgds.
John Arild Berentsen
Norway
JoHNY - 18 Nov 2005 18:35 GMT
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread
Enable EMail Alerts
Rate this Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.