I have on the c900, and the ng900/9-3 the windscreen is basically the same,
the mounting points differ slightly. There are three screws that hold it in
place, you may have to drill out the locations first, but once you have the
holes, it is a 5 minute operation.
Just two words of warning:
1. Use stainless steel screws.
2. Put silicone the holes before fastening the screws to seal the holes to
keep water from leaking in and starting rust or damaging your ceiling.
Jeremy
> Is there anybody out there that has installed a Wind Deflector to their
> 900/9-3 Convertable. If so what are your experiences, are they any good?
>
> Julian