I'm looking for a helpful discussion on how to replace a broken
rail spring on a '95 SL2 sunroof. The spring is about 1/4" in diameter
and pushes on either side of the sunroof during opening/ closing.
Appears that I can remove the sunroof with a torx bit. Is this wise?
Can the spring be replaced after removing the sunroof or do I need
to buy an assembly? I'd like to replace both springs on either side,
but only one is broken at this time.
Steve Mackie - 22 Oct 2005 14:06 GMT
Start by contacting your local dealer. The parts counter people will be able
to tell you if you can replace parts or if you need a whole assembly. This
is of course if it's a factory sunroof and not aftermarket.
Steve
> I'm looking for a helpful discussion on how to replace a broken
> rail spring on a '95 SL2 sunroof. The spring is about 1/4" in diameter
[quoted text clipped - 4 lines]
> to buy an assembly? I'd like to replace both springs on either side,
> but only one is broken at this time.
NapalmHeart - 27 Oct 2005 14:47 GMT
> I'm looking for a helpful discussion on how to replace a broken
> rail spring on a '95 SL2 sunroof. The spring is about 1/4" in diameter
[quoted text clipped - 4 lines]
> to buy an assembly? I'd like to replace both springs on either side,
> but only one is broken at this time.
Check with Joey at 6th Planet. They have replacement parts for far less
than the factory and good advice about your situation.
Myself, I just siliconed the sunroof shut.
Ken