I need to disarm the airbag system on a 2002 SL2

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

Tony & Denise Akers - 20 May 2006 12:48 GMT

Can anyone tell me how this is done?

Reply to this Message

Ritz - 20 May 2006 13:04 GMT

> Can anyone tell me how this is done?

And you want to do that because.....

Reply to this Message

Tony & Denise Akers - 20 May 2006 13:05 GMT

I am goning to replace a bumper cover and I don't want any suprises

> > Can anyone tell me how this is done?
>
> And you want to do that because.....

Reply to this Message

Tony & Denise Akers - 20 May 2006 13:35 GMT

Ok, since this seems to be important to some people,
I need to replace a fender and a bumper cover. I don't think the bags will
deploy, But it seems like turning them off would be the safest route to
take.

> Can anyone tell me how this is done?

Reply to this Message

BläBlä - 20 May 2006 14:21 GMT

> Ok, since this seems to be important to some people,
> I need to replace a fender and a bumper cover. I don't think the bags will
> deploy, But it seems like turning them off would be the safest route to
> take.
>
> > Can anyone tell me how this is done?

Its somewhat involved. I can post the steps but you wont get to see the
pictures here. (one step invovles removing the top of the dash) Watch
for yellow wrapped wires and modules/sensors. Avoid those and you should
be just fine.

Reply to this Message

Ritz - 20 May 2006 14:23 GMT

Disconnect the battery and give the SRS system 20-30 minutes to
de-engergize. (in theory) CYA statement: I'm not recommending that
you do this, but it should work.

Reply to this Message