radiator dimensions

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

Dexter - 12 Apr 2005 00:26 GMT

If anyone has a radiator out of his C/K, I need the dimensions. Think I
have come up with something all you non-purist C/K owners will like. Priced
right too.
Dexter

Reply to this Message

John Poulos - 12 Apr 2005 00:34 GMT

Which C-K ?

> If anyone has a radiator out of his C/K, I need the dimensions. Think I
> have come up with something all you non-purist C/K owners will like. Priced
> right too.
> Dexter

Signature

JP/Maryland
Studebaker On the Net http://stude.com
My Ebay items:http://www.stude.com/EBAY/
64 Challenger (Green Wrapper)
63 R2 4 speed GT Hawk
55 Speedster
50 2R 10 truck

Reply to this Message

Dexter - 12 Apr 2005 02:28 GMT

The 1955 V-8

> Which C-K ?
>
> > If anyone has a radiator out of his C/K, I need the dimensions. Think I
> > have come up with something all you non-purist C/K owners will like. Priced
> > right too.
> > Dexter

Reply to this Message

Nate Nagel - 12 Apr 2005 02:36 GMT

> The 1955 V-8
>
[quoted text clipped - 7 lines]
>>>right too.
>>>Dexter

Signature

replace "fly" with "com" to reply.
http://home.comcast.net/~njnagel

Reply to this Message

Nate Nagel - 12 Apr 2005 02:37 GMT

If you haven't gotten a reply by friday post back, I can check my '55 on
Sat.

nate

> The 1955 V-8
>
[quoted text clipped - 7 lines]
>>>right too.
>>>Dexter

Signature

replace "fly" with "com" to reply.
http://home.comcast.net/~njnagel

Reply to this Message

Pat Drnec - 12 Apr 2005 01:03 GMT

I have one out of a car - I'll measure tomorrow.

> If anyone has a radiator out of his C/K, I need the dimensions. Think I
> have come up with something all you non-purist C/K owners will like. Priced
> right too.
> Dexter

Signature

Remove all the x's to email.

"Life is not a journey to the grave with the intention of arriving
safely in a pretty and well preserved body, but rather to skid in
broadside, thoroughly used up, totally worn out, and loudly proclaiming
-- WOW--What a Ride!!!" ----- Unknown

1953 Starlight Coupe
1954 Starlight Coupe R1/4-speed
1958 Silver Hawk
1960 Frua Italia Larks (2 - they're here!)
1962 Lark VI
1963 Avanti R2 R4324
1963 Lark Cruiser (R2 3/4 clone in progress)
1963 GT Hawk
1963 Daytona Wagonaire
1964 Cruiser (Survivor)
1956 2E7
2000 Boxster S
2000 Ducati 748
2002 Jeep Overland
2004 Ducati Monster 1000
http://homepage.mac.com/pdrnec/PhotoAlbum81.html

Reply to this Message

Nate Nagel - 12 Apr 2005 01:08 GMT

> I have one out of a car - I'll measure tomorrow.
>
[quoted text clipped - 3 lines]
>> right too.
>> Dexter

DExter,

are you asking for 53-55 or 56-up?

nate

Signature

replace "fly" with "com" to reply.
http://home.comcast.net/~njnagel

Reply to this Message

Dexter - 12 Apr 2005 02:30 GMT

Sorry, I don't think in terms of a 6 cyl. I'm askeing about the 55 V-8

> > I have one out of a car - I'll measure tomorrow.
> >
[quoted text clipped - 9 lines]
>
> nate

Reply to this Message

A.J. - 12 Apr 2005 22:22 GMT

> If anyone has a radiator out of his C/K, I need the dimensions. Think
> I have come up with something all you non-purist C/K owners will like.
> Priced right too.
> Dexter

They are 20 1/2" from bottom tank to top of raidator cap
26 1/4" at widest part
25 1/2" center of hole to center of hole on core support
24 1/4" core width
19 1/2" top tank to bottom tank
the cheepest way to go is from Midwest motor sports they have a
Northern Raidator Aluminum 19" X 24" for $149 just make a couple
of alum. brackets and weld on for less than $200 you can have one
better than the one on e-bay AJ

Reply to this Message

Dexter - 14 Apr 2005 00:56 GMT

You're ahead of me! Based on what I learned, I was going to refer you to
the Summit catalog or their web site. Aluminum radiator for $169.00. My
brother is putting one in a Camero right now. That's how I found it. The
small one for GM should do the trick.
Anyway, thank's for the tip..

> > If anyone has a radiator out of his C/K, I need the dimensions. Think
> > I have come up with something all you non-purist C/K owners will like.
[quoted text clipped - 10 lines]
> of alum. brackets and weld on for less than $200 you can have one
> better than the one on e-bay AJ

Reply to this Message

Michael - Roseland FL - 14 Apr 2005 06:00 GMT

Dexters brother is a top auto restoration shop owner. His work has
appeared in many maazines. The guy is aces!!

Reply to this Message