 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
Car Forum / Antique and Collectibles / Studebaker / September 2005Hawk 4 speed drive shaft needed
Anyone have one? It's 57 7/16 or 57 5/8 long, depending on joint type. I can use either, and it'll have the course 4 speed spline on the yoke.  SignatureJP/Maryland Studebaker On the Net http://stude.com My Ebay items:http://www.stude.com/EBAY/ 64 R2 4 speed Challenger (Plain Wrapper) 63 R2 4 speed GT Hawk 62 Lark 2 door 61 Hawk 60? Hawk 53 Starlight jp, i had one made for one of my 53's down here in salisbury at the international truck dealer's machine shop. they charged me 125.00 and the bonus is you don't have to worry about buying somebodies used piece that may or may not be out of balance. ed I may just do that, but I still need a yoke. You have the name of the joint ? > jp, i had one made for one of my 53's down here in salisbury at the > international truck dealer's machine shop. they charged me 125.00 and > the bonus is you don't have to worry about buying somebodies used piece > that may or may not be out of balance. ed SignatureJP/Maryland Studebaker On the Net http://stude.com My Ebay items:http://www.stude.com/EBAY/ 64 R2 4 speed Challenger (Plain Wrapper) 63 R2 4 speed GT Hawk 62 Lark 2 door 61 Hawk 60? Hawk 53 Starlight jp, accubilt 410 548 5700. they are on rt 13 directly next to the new mall and just off the rt 50 bypass around salisbury. ed |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2008 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.