 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
Car Forum / Antique and Collectibles / Studebaker / October 2007OHV six ignition
Has anyone done a conversion for the OHV six distributor? Is there a Pertronix or equivalent conversion? Any one have the current part numbers for cap, rotor, condenser, points, etc...? Also what color did the original engine come in? What year, what color? Was head and block the same color? Does any one have some photos of a stock color scheme? Thanks, Wiz. Check out this web site:http://www.smpcorp.com/web_app/catalog/publiccatalog.asp Henry > Has anyone done a conversion for the OHV six distributor? Is there a > Pertronix or equivalent conversion? Any one have the current part numbers [quoted text clipped - 6 lines] > > Wiz. Dave Thibeault(T-Bow) has a brand new electronic Distributor made in USA plus all kinds of distributor parts etc. His ad is in TW every month. I forget who builds it for him , Maybe MSD?? Any way $329 isnt bad for a brandnew electronic distrib for an engine that hasnt been made for 43 years. > Has anyone done a conversion for the OHV six distributor? Is there a > Pertronix or equivalent conversion? Any one have the current part numbers [quoted text clipped - 6 lines] > > Wiz.  Signature2R10 2R14 3E38 4E3 4E28 5E13 7E7 8E7 8E12 8E28 etc etc I believe it is a Mallory Unilite trigger in a new billet housing. nate > Dave Thibeault(T-Bow) has a brand new electronic Distributor > made in USA plus all kinds of distributor parts etc. [quoted text clipped - 26 lines] > 8E28 > etc etc Thanks N8N, I knew it started with an M. > I believe it is a Mallory Unilite trigger in a new billet housing. > [quoted text clipped - 27 lines] >> 8E28 >> etc etc Signature2R10 2R14 3E38 4E3 4E28 5E13 7E7 8E7 8E12 8E28 etc etc > Thanks N8N, I knew it started with an M. > [quoted text clipped - 44 lines] > > - Show quoted text - I have one of them in a v8. I went to the mallory coil and wires too. (you know how it is when the new summit cat. shows up.). I am very pleased. timing is rock solid. would I do it again. Absofrigginlootly!! Rich > Has anyone done a conversion for the OHV six distributor? Is there a > Pertronix or equivalent conversion? Any one have the current part numbers [quoted text clipped - 6 lines] > > Wiz. I have pertronix for most Studebakers. Give me a call at 937-878-1576, Fairborn Studebaker > Has anyone done a conversion for the OHV six distributor? Is there a > Pertronix or equivalent conversion? Any one have the current part numbers [quoted text clipped - 6 lines] > > Wiz. I was at the local generator rebuilder a while back and they had universal hall pickups in stock that one could use for anything. The pickups bolted in in place oc the breaker points and you just slipped this ring over the breaker cam so you could use the same pickup and just select the ring for the number of cylinders. Any idea how much and what brand they were? All I need is a trigger to take the place of the points and what you mentioned sounds like the part. My ignition system is first rate except for the inconsistency in the lobes and the rubbing block of the points. Wiz. >> Has anyone done a conversion for the OHV six distributor? Is there a >> Pertronix or equivalent conversion? Any one have the current part numbers [quoted text clipped - 13 lines] > this ring over the breaker cam so you could use the same pickup and > just select the ring for the number of cylinders. |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2008 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.