Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Subaru Cars / May 2004

Tip: Looking for answers? Try searching our database.

Liberty and Impreza won't start when warm

Thread view: 
Enable EMail Alerts  Start New Thread
Thread rating: 
Paul Fisher - 26 May 2004 03:40 GMT
My previous car was a 95 Liberty which developed an annoying habit of not
starting when the engine is warm. OK when cold, OK when hot. But after a
short run to the shops the darn thing wouldn't start unless I waited half an
hour, or tipped a bucket of water over the engine.

I put it down to bad luck, traded it for an Outback and moved on.

Now my wife's 95 Impresa (1600cc engine - not the WRX) has developed exactly
the same problem.

Is this a common thing or a known "feature"?  Any ideas on the cause and the
fix?

Many thanks
Paul Fisher
Perth, Western Australia
http://paulfisher.org
username - 26 May 2004 08:31 GMT
> My previous car was a 95 Liberty which developed an annoying habit of not
> starting when the engine is warm. OK when cold, OK when hot. But after a
[quoted text clipped - 13 lines]
> Perth, Western Australia
> http://paulfisher.org

paul,

i had the something like that happening with my '91 bmw.

do a search on google for "warm start" and "check valve"  you will see
many people with various brands have a similar problem (which MAY be
the same problem you have). the check valve is a one/way valve between
the fuel pump and your engine. if it fails fuel drains back towards
the tank and causes vapor lock. my car would start fine hot or cold...
but between 20 min and an hour or so after shutting the engine off it
would take numerous attempts (2-4) to turn it over (that cant be too
good for the starter) i guess once the line finally drains back all
the way to the tank (after an hour or so) there is no more a vapor
interference in the fuel line.

a mechanic wanted to replace the fuel pump since the check valve was
part of it(it's located in the fuel tank and is an expensive german
part $$$) i found a kit for a earlier bmw model to fix the same
problem (it cost $3) it simply put another check valve on the outside
of the tank making the one inside redundant. problem solved...for me
at least...

good luck
username - 26 May 2004 09:01 GMT
> My previous car was a 95 Liberty which developed an annoying habit of not
> starting when the engine is warm. OK when cold, OK when hot. But after a
[quoted text clipped - 13 lines]
> Perth, Western Australia
> http://paulfisher.org

paul,

i had the something like that happening with my '91 bmw.

do a search on google for "warm start" and "check valve"  you will see
many people with various brands have a similar problem (which MAY be
the same problem you have). the check valve is a one/way valve between
the fuel pump and your engine. if it fails fuel drains back towards
the tank and causes vapor lock. my car would start fine hot or cold...
but between 20 min and an hour or so after shutting the engine off it
would take numerous attempts (2-4) to turn it over (that cant be too
good for the starter) i guess once the line finally drains back all
the way to the tank (after an hour or so) there is no more a vapor
interference in the fuel line.

a mechanic wanted to replace the fuel pump since the check valve was
part of it(it's located in the fuel tank and is an expensive german
part $$$) i found a kit for a earlier bmw model to fix the same
problem (it cost $3) it simply put another check valve on the outside
of the tank making the one inside redundant. problem solved...for me
at least...

good luck
Paul Fisher - 26 May 2004 09:34 GMT
Thanks Username,

I'll look that up.

Paul
Klaus Sturm - 26 May 2004 09:52 GMT
Crank angle sensor-trust me.

Klaus
(also in Australia)
> My previous car was a 95 Liberty which developed an annoying habit of not
> starting when the engine is warm. OK when cold, OK when hot. But after a
[quoted text clipped - 13 lines]
> Perth, Western Australia
> http://paulfisher.org
Paul Fisher - 27 May 2004 11:34 GMT
> Crank angle sensor-trust me.

G'day Klaus,

Can you give me any more details?

Thanks
Paul
oothlagre - 27 May 2004 18:21 GMT
The sensor is directly above and slightly behind the crankshaft pulley from
what I can see. It's only about an inch or so long and has a small wiring
harness attached to it. Mine has two little bolts holding it in.

> > Crank angle sensor-trust me.
>
[quoted text clipped - 4 lines]
> Thanks
> Paul
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread
Enable EMail Alerts
Rate this Thread



©2009 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.