 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
Car Forum / Subaru Cars / February 2005Air flow meter sensor "99 Forester
The check engine light came on in my Forester. I got the diagnostic code, PO106- manifold absolute pressure/barometric pressure circuit range/performance problem. The Subaru technical site had a bulletin concerning the air flow meter sensor.It stated that the element becomes contaminated with Silicon oil, Carbon and dust at the sensor base causing a malfunction. My question is, where is the air flow meter sensor located? Is this something I could access and clean? Any help would be appreciated. My state requires emission inspection and if the check engine light is not turned off it will not pass. The meter should be attached to the air filter box and will be upstream of the throttle. > The check engine light came on in my Forester. I got the diagnostic > code, PO106- manifold absolute pressure/barometric pressure circuit [quoted text clipped - 5 lines] > would be appreciated. My state requires emission inspection and if the > check engine light is not turned off it will not pass. |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2008 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.