I moved a full size set on top of the roof-rack of a legacy L sw.
The preacautions I took, other than for protection of the set, was to
have the box spring on top of the mattress, for rigidity, and the front
edge of the set pretty close to the front end of the roofrack (to
prevent lift), thus leaving a longer section past the rear end of the rack.
5 times I moved a full size mattress on top of the roof rack of the 03
outback. Just made sure that the front end of the mattress was close to
the front end of the rack. Strapped the mattress tightly without
deforming it. It worked well.
Nope, not a mover here ;)
> I moved a full size set on top of the roof-rack of a legacy L sw.
>
[quoted text clipped - 15 lines]
>>
>> If so, would a full size bed fit on a subaru legacy rooftop?
Whatever you do to secure the mattress, MAKE SURE THE FRONT IS TIED
DOWN. I'd recommend running a rope up to the front of the car somehow,
possibly tyeing it off to the tow hook or tiedown hook and padding the
rope as it goes over the hood front.
I've seen too many mattresses trying to achieve flight without the front
tied down.
mm - 26 Apr 2007 14:49 GMT
> > I moved a full size set on top of the roof-rack of a legacy L sw.
>
[quoted text clipped - 20 lines]
> possibly tyeing it off to the tow hook or tiedown hook and padding the
> rope as it goes over the hood front.
Sure but how to tie down the mattress in that front area?
> I've seen too many mattresses trying to achieve flight without the front
> tied down.
>- Hide quoted text -
>
> - Show quoted text -
CompUser - 26 Apr 2007 15:35 GMT
In article <1177595342.697010.271790
@n15g2000prd.googlegroups.com>,
curiousnfirewall@gmail.com says...
> Sure but how to tie down the mattress in that front area?
You don't have a friend with a pickup truck?
Buy him dinner and be done with it.
> I moved a full size set on top of the roof-rack of a legacy L sw.
I have 2005 Lagacy wagon (GT).
> The preacautions I took, other than for protection of the set, was to
> have the box spring on top of the mattress, for rigidity, and the front
> edge of the set pretty close to the front end of the roofrack (to
> prevent lift), thus leaving a longer section past the rear end of the rack.
What kind of roof rack I should install? I called the Subar service
today and was told about *crossbar*.
> 5 times I moved a full size mattress on top of the roof rack of the 03
> outback. Just made sure that the front end of the mattress was close to
> the front end of the rack.
The rack you are referrigng to is the same as "crossbar", right?
> Strapped the mattress tightly without deforming it. It worked well.
Can you tell me what you used to tighten it? I am going to have to
hire someone to load it for me. - I am a female:)
I am going to need something to cover the mattress from getting dirty.
Any suggestion?
Along with the matress set on rooftop, I am also thinking to attach a
trailer to carry things during a small move. Do you think I can manage
driving with a trailer fully loaded and a full size bed set on the
rooftop? Usually, I don't even have a passenger in my car. Should I
practise before I attempt it?
> Nope, not a mover here ;)
Me neither :)
> > Is carrying a mattress and box spring on the rooftop (with
> > accessories to hold it on top of a passenger car) legal when driving
[quoted text clipped - 3 lines]
>
> - Show quoted text -
Rick Courtright - 28 Apr 2007 21:07 GMT
Hi,
Make it easy on yourself: use your feminine wiles...
Find a couple of "guy persons" w/ a pickup to help you--guys are
generally suckers for "damsels in distress"--or hire a small truck/van
from U-Haul or other vendors. Trying to be nice here, but your questions
indicate such a lack of experience w/ such an adventure that I see tears
and damaged goods in the picture before you're done!
Best of luck,
Rick