Hi,
Time to switch in winer tiress rims, first time I ran into a lug nut
which won't budge no matter how hard I try. Last time when I
put on summer tire rims, I did not over torqued or anything.
What gives? Any thrcik to make it loose? Car is 2000 Impreza RS
on after market Momo rims with spline lug nuts. I am afraid I'll
break the head off if I try any harder.
TIA,
Tony
Thomas Hanno - 18 Nov 2007 02:52 GMT
Same thing happened to me this summer. I googled the problem and found
a couple of tricks. What finally worked was lightly tightening all the
lugs (by hand) and lowering the car, then shaking the car by the roof
rack. I heard a click and the tire came right off when I jacked the
car back up. I'd suggest googling it or someone else will come along
and give you some tips.
> Hi,
> Time to switch in winer tiress rims, first time I ran into a lug nut
[quoted text clipped - 5 lines]
> TIA,
> Tony
Bugalugs - 18 Nov 2007 08:14 GMT
> Same thing happened to me this summer. I googled the problem and found
> a couple of tricks. What finally worked was lightly tightening all the
[quoted text clipped - 12 lines]
>> TIA,
>> Tony
If all else fails you might have to drill and split the nut and replace
it and the stud. (Be a sod of a job though)
Bob Bailin - 18 Nov 2007 09:44 GMT
> Hi,
> Time to switch in winer tiress rims, first time I ran into a lug nut
[quoted text clipped - 5 lines]
> TIA,
> Tony
Bring it to any tire shop and ask them to use their impact wrench on
the stubborn lugnut. Even the most stubborn will come off within seconds.
Bob
Bonehenge (B A R R Y) - 18 Nov 2007 12:30 GMT
>Hi,
>Time to switch in winer tiress rims, first time I ran into a lug nut
>which won't budge no matter how hard I try. Last time when I
>put on summer tire rims, I did not over torqued or anything.
>What gives? Any thrcik to make it loose?
PB Blaster is great stuff, along with an impact wrench.
Matt Richards - 19 Nov 2007 04:46 GMT
> Hi,
> Time to switch in winer tiress rims, first time I ran into a lug nut
[quoted text clipped - 5 lines]
> TIA,
> Tony
I wouldn't try the shotgun method..
http://seattlepi.nwsource.com/local/339418_shotgun13.html
Matt.
David - 19 Nov 2007 14:23 GMT
>Hi,
>Time to switch in winer tiress rims, first time I ran into a lug nut
[quoted text clipped - 5 lines]
>TIA,
>Tony
You'll need a breaker bar longer than 18". Tighten slightly, then
loosen.