
Signature
to reply, change ( .not) to ( .net)
> > Does anyone know where the OBD header for a 1986 Subaru GL is located? Also,
> > anyone know of any good diagnostic software for this car (or older Subarus in
[quoted text clipped - 10 lines]
> --
> to reply, change ( .not) to ( .net)
OK, Carl, thanks for that tip. But is there any for a 93 Legacy Turbo?
Carl 1 Lucky Texan - 11 Jul 2008 02:36 GMT
>>>Does anyone know where the OBD header for a 1986 Subaru GL is located? Also,
>>>anyone know of any good diagnostic software for this car (or older Subarus in
[quoted text clipped - 12 lines]
>
> OK, Carl, thanks for that tip. But is there any for a 93 Legacy Turbo?
Visit the link and scroll down.
http://www.troublecodes.net/Subaru/
Carl

Signature
to reply, change ( .not) to ( .net)
Well if that's the case, why is there a list of error codes. It's obviously
the fuel-injection model, so that link won't do ME any good, but there was a
site I went to that gives codes for this car.
>> Does anyone know where the OBD header for a 1986 Subaru GL is located? Also,
>> anyone know of any good diagnostic software for this car (or older Subarus in
[quoted text clipped - 8 lines]
>
>Carl
Carl 1 Lucky Texan - 11 Jul 2008 02:38 GMT
> Well if that's the case, why is there a list of error codes. It's obviously
> the fuel-injection model, so that link won't do ME any good, but there was a
[quoted text clipped - 12 lines]
>>
>>Carl
Well, when I see OBD in caps, I mistakenly thought of the OBDI and OBDII
protocols.
There IS Subaru OEM diagnostics for your injected car. Just continue
scrolling down the page I linked.
Carl

Signature
to reply, change ( .not) to ( .net)
Dave - 11 Jul 2008 13:51 GMT
> Well if that's the case, why is there a list of error codes. It's
> obviously
> the fuel-injection model, so that link won't do ME any good, but there was
> a
> site I went to that gives codes for this car.
From the site:
# The connectors are under the steering wheel, to the left of the module on
most models.
# On cerebrated and SPFI injected 89 models, the test connectors are located
on the engine side/driver's side of the firewall.
Dave - 11 Jul 2008 14:26 GMT
>> Well if that's the case, why is there a list of error codes. It's
>> obviously
[quoted text clipped - 7 lines]
> # On cerebrated and SPFI injected 89 models, the test connectors are
> located on the engine side/driver's side of the firewall.
Dang spellchecker...
# On carbureted and SPFI injected 89 models, the test connectors are located
on the engine side/driver's side of the firewall.