Well...okay...a big ding. But that gives me a good idea of the pricing,
thanks! (Big ding means bald tyres + wet road = skidding into back of
truck with the ladder at the back = front of hood has a crease and
scraping from side to side between the headlamps. Is that the sort of
ding that can be banged out?)
> Well...okay...a big ding. But that gives me a good idea of the pricing,
> thanks! (Big ding means bald tyres + wet road = skidding into back of
> truck with the ladder at the back = front of hood has a crease and
> scraping from side to side between the headlamps. Is that the sort of
> ding that can be banged out?)
You can repair just about any body panel. In geographical areas where
there are people with panel beating skills, and reasonably low salary
levels,
it might be an option.
(If you ask the question whether it can be done, that would presuppose that
you are not capable of doing it yourself.)
Your use of the spelling 'tyres' suggests you might not be in the USA, but
had
you been in the UK, I would have expected you to say 'bonnet'.
Sometimes it is cheaper to get an undamaged panel from a junkyard, repaint,
and install.
mack - 26 May 2006 22:36 GMT
>> Well...okay...a big ding. But that gives me a good idea of the pricing,
>> thanks! (Big ding means bald tyres + wet road = skidding into back of
[quoted text clipped - 18 lines]
> repaint,
> and install.
~~~~~~~~~~~~~~~~
Hmm, good going, Sherlock, about the use of "tyres".
But as you noticed, he said "hood" instead of "bonnet" and described the
vehicle he ran into as a truck, not a "lorry"......
mrdarrett@gmail.com - 26 May 2006 23:40 GMT
> >> Well...okay...a big ding. But that gives me a good idea of the pricing,
> >> thanks! (Big ding means bald tyres + wet road = skidding into back of
[quoted text clipped - 22 lines]
> But as you noticed, he said "hood" instead of "bonnet" and described the
> vehicle he ran into as a truck, not a "lorry"......
Holmes, the original poster appears to be from Delaware, United States,
based on his/her IP address.
- "Dr. Watson" ;)
skewe - 27 May 2006 05:16 GMT
Check ebay
if not the local junk yard.
there are always ppl selling used and new hoods on ebay
http://www.golfer-review.com/m_toyota/camry.htm
mack - 26 May 2006 22:40 GMT
>> Well...okay...a big ding. But that gives me a good idea of the pricing,
>> thanks! (Big ding means bald tyres + wet road = skidding into back of
[quoted text clipped - 18 lines]
> repaint,
> and install.
~~~~~~~~~~~~~~~~~~~~~
Just an uneducated guess, but since it's the best selling sedan in the US
(in the world?) I'd think there would be plenty of hoods in wrecking yards
waiting for new owners, and likely at a much lower price than buying from a
dealer. Heck, you may even find one in the right color~ and locating one
shouldn't be too hard, since major wrecking yards have hotlines between
them, in which they ask other yards if they have a particular part and get
an answer in minutes.
HLS@nospam.nix - 27 May 2006 12:14 GMT
> Just an uneducated guess, but since it's the best selling sedan in the US
> (in the world?) I'd think there would be plenty of hoods in wrecking yards
[quoted text clipped - 3 lines]
> them, in which they ask other yards if they have a particular part and get
> an answer in minutes.
A 'dealer' would be the last place to go, and then only in the direst of
desperation.
Try www.car-part.com IF he is in the USA.
mundei@pjm.com - 30 May 2006 16:57 GMT
Thanks for all the input. And to end the speculation...I'm originally
from New Zealand, living in Pennsylvania USA. I used hood instead of
bonnet because I've encountered a lot of blank stares since I moved
here if I use "bonnet" and "boot" instead of "hood" and "trunk".