Sparkplug change 2001 Camry V6

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

Richard - 25 Feb 2007 23:07 GMT

I'm at the time to do the spark plug change. However, I do need
advice. The rear plugs look impossible to replace, as I can't even
see them from up top. One suggestion made to me was to remove the
intake manifold to get to the rear plugs. I don't feel confident
doing that.

Any suggestions on how to tackle this job?

TIA
Richard

Ignore the fake address.
reply to rlewando_at_yahoo_dot_com

Reply to this Message

Daniel - 27 Feb 2007 14:36 GMT

> I'm at the time to do the spark plug change. However, I do need
> advice. The rear plugs look impossible to replace

======
Search this group for select keywords like "V6", "spark plug"
You'll find the issue has been addressed numerous times in the past
and different opinions are available. Some few have removed the intake
manifold, some have used combinations of extensions first placing the
socket then the extensions, and there are probably some other ideas
I'm not remembering.

Reply to this Message