oxygen sensor, '96 camry

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

mrdarrett@gmail.com - 23 May 2008 21:55 GMT

After the success I had with replacing the front O2 (fuel-air-ratio?)
sensor on my wife's '99 Camry (CEL came on at ~84k), I think I will
try the same on my '96 (152k, no CEL) to improve fuel economy. Fuel
economy is in the 20 mpg range (City), and I think this will do the
trick.

Does the Denso 234-2058 come with the flange? The 234-2050 and Bosch
12211 I think do not come with the flange, and must be installed into
the old flange with a tool - ??????

I'll likely go with the Denso 234-2058 at rockauto, unless someone has
a better suggestion...?

Thanks,

Michael

Reply to this Message

johngdole@hotmail.com - 27 May 2008 02:41 GMT

From the picture on rockauto.com, it loooks like the flange is a part
of the sensor:

http://info.rockauto.com/Denso/Detail2.html?234-2058_bw.jpg

On May 23, 1:55 pm, mrdarr...@gmail.com wrote:

> After the success I had with replacing the front O2 (fuel-air-ratio?)
> sensor on my wife's '99 Camry (CEL came on at ~84k), I think I will
[quoted text clipped - 12 lines]
>
> Michael

Reply to this Message

mrdarrett@gmail.com - 27 May 2008 16:53 GMT

On May 26, 6:41 pm, johngd...@hotmail.com wrote:

> From the picture on rockauto.com, it loooks like the flange is a part
> of the sensor:
[quoted text clipped - 19 lines]
>
> > Michael

Yep... just to be safe I bought it at AutoZone (Bosch) so I could see
the part before buying it.

Now I'm doing an mpg study...

Thanks,

Michael

Reply to this Message

johngdole@hotmail.com - 28 May 2008 05:25 GMT

At your next emissions test check the HC reading. See it near the low
especially if you use NGK Iridium plugs.

On May 27, 8:53 am, mrdarr...@gmail.com wrote:

> Yep... just to be safe I bought it at AutoZone (Bosch) so I could see
> the part before buying it.
[quoted text clipped - 4 lines]
>
> Michael

Reply to this Message