Tundra Lift-kit

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

mastablast - 09 Aug 2004 16:59 GMT

Any one running the spacers in the front springs? I have a 2001 4wd Tundra.
And the spacers adds about an inch in height. I noticed a lot of popping
coming from the front end. I suspect the upper ball joints are going. The
lift has been installed for about a year and less then 20,000 miles. The
spacer do put some angle on the upper ball joints, but I did not think I
would be buying parts so soon. Any one else have experience with this issue?

Reply to this Message

mastablast - 09 Aug 2004 20:24 GMT

looks like this will fix my problem

http://www.chaosfab.com/ucatundra.html

> Any one running the spacers in the front springs? I have a 2001 4wd Tundra.
> And the spacers adds about an inch in height. I noticed a lot of popping
> coming from the front end. I suspect the upper ball joints are going. The
> lift has been installed for about a year and less then 20,000 miles. The
> spacer do put some angle on the upper ball joints, but I did not think I
> would be buying parts so soon. Any one else have experience with this issue?

Reply to this Message