Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Toyota / Toyota Trucks / November 2007

Tip: Looking for answers? Try searching our database.

89 pickup interior fan switch

Thread view: 
Enable EMail Alerts  Start New Thread
Thread rating: 
Ian Zuiring - 20 Nov 2007 00:35 GMT
I have a 1989 Toyota pickup.  The 4 speed interior fan switch does not work
in the two lowest speeds.  High and the next speed down work fine.

I've replaced the switch (very expensive) and the new one does the same
thing.

So what the heck could be the culprit?
Signature

Ian

ZaXXoN - 19 Nov 2007 00:55 GMT
Hey!
Sounds like the resistor pack at the blower.
ZaXXoN

>I have a 1989 Toyota pickup.  The 4 speed interior fan switch does not work
>in the two lowest speeds.  High and the next speed down work fine.
[quoted text clipped - 3 lines]
>
>So what the heck could be the culprit?
Bruce L. Bergman - 20 Nov 2007 04:46 GMT
>I have a 1989 Toyota pickup.  The 4 speed interior fan switch does not work
>in the two lowest speeds.  High and the next speed down work fine.
[quoted text clipped - 3 lines]
>
>So what the heck could be the culprit?

 Should have asked here before changing the switch, we would have
saved you a lot of trouble - it's the resistor pack, the third coil
has gone open and it drops third and fourth (slowest) speed.

 Follow the wiring harness back from the fan motor, it'll stop within
six inches at a plug.  That's plugged into the resistor pack, which is
held into a hole in the side of the heater duct with one screw and a
tab at the other end.  The coils stick out into the fan airflow for
cooling.

 Dealer parts counter, $20-ish.  Don't bother trying to fix it,
you'll never get solder to stick, and if you do it'll melt when in
use.  (Think electric wall heater.)

 After you change the resistor pack, check the amp draw of the blower
motor is in spec, and that it spins freely, you might also be due for
a new or rebuilt blower motor.

 A dragging motor will overload the resistor and burn it up faster -
especially if the motor stalls and the current draw continues but the
cooling airflow goes away.

 --<< Bruce >>--
Scotty - 21 Nov 2007 09:58 GMT
>>I have a 1989 Toyota pickup.  The 4 speed interior fan switch does not
>>work
[quoted text clipped - 28 lines]
>
>  --<< Bruce >>--

$20!!! Hell, Toyota sells em for $75 here in Australia!

$5 at the local wreckers 2nd hand though.
nobody - 22 Nov 2007 23:12 GMT
> $20!!! Hell, Toyota sells em for $75 here in Australia!
>
> $5 at the local wreckers 2nd hand though.

I just checked the price here in New Orleans.  They want $36.00
Ian Zuiring - 24 Nov 2007 23:48 GMT
Thanks to all who responded.  The resistor pack did the trick.  Cost was $41
(6.2% sales tax) at Eddy's Toyota in Wichita, KS.
Signature

Ian

>I have a 1989 Toyota pickup.  The 4 speed interior fan switch does not work
>in the two lowest speeds.  High and the next speed down work fine.
[quoted text clipped - 3 lines]
>
> So what the heck could be the culprit?
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread
Enable EMail Alerts
Rate this Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.