> been to the dealer twice on a strange noise coming from underneath the
> truck, passenger side towards the rear. rattle thump and it typically
[quoted text clipped - 4 lines]
> like mine?
> tks
If your rear brakes are not adjusted right it can cause "drive line wrap
up" as my mechanic called it. He lubed the u-joints, slip joint and
adjusted the brakes and the clunk went away--- for awhile.<g> Some say
it is because the springs allow the rear axle to rotate or wrap which
causes the slip joint to bind up until you let off of the brakes. Do a
search for tacoma driveline wrap. Here is one forum:
http://www.tacomaterritory.com/forum/showthread.php?p=1761517

Signature
A man is known by the company he keeps- Unknown
Anyolmouse
Anyolmouse - 04 Nov 2009 19:33 GMT
> > been to the dealer twice on a strange noise coming from underneath the
> > truck, passenger side towards the rear. rattle thump and it typically
[quoted text clipped - 15 lines]
> search for tacoma driveline wrap. Here is one forum:
> http://www.tacomaterritory.com/forum/showthread.php?p=1761517
Whoops- the search should be for tacoma driveline clunk. Here is another
result from that search:
http://www.tacomaterritory.com/forum/showthread.php?p=1761517 There
appears to be a combination of causes.

Signature
We have met the enemy and he is us-- Pogo
Anyolmouse
Dan - 05 Nov 2009 04:22 GMT
>> been to the dealer twice on a strange noise coming from underneath the
>> truck, passenger side towards the rear. rattle thump and it typically
[quoted text clipped - 15 lines]
> search for tacoma driveline wrap. Here is one forum:
> http://www.tacomaterritory.com/forum/showthread.php?p=1761517
This not the axle wrap noise prob.....something else. happens on a bumpy
road, come to a complete stop then excelerate, then comes the rattle,
thump, tin can sounding doise. Very annoying, but truck drives great.
Dealership inspections turn up nothing as usual.....Again, kind of a
rattle thunk grind then goes away within a few seconds. I,m the original
owner, bought it new in 01 and have maintained per the manual. Any other
ideas?
tks