2005 Camry Programming home link???

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

David Wells - 27 May 2005 15:26 GMT

We just got a new 2005 Camry LE with the B packet here in Canada. The
dealer took our Lift Master security + garage door opener and
programmed it. Well it does not work. I tried Erasing the code and
then reprogarm according to the manual and even tired the other unit I
have. No luck at all. Has anyone else got it to work on a Lift Master
system. I even tried the Programming and entrance gate/programing all
devices in the Canadian mmarket no joy at all. Both of the remotes
supplied with the door work fine.

Thank You for any help.

David

Reply to this Message

doordoc@prodigy.net - 27 May 2005 16:42 GMT

You have to push the smart button momentarily on the garage door motor
head after you program the visor trans, push the button on the visor
that you want to use within 30 secs of pushing the smart button, push
the visor button again & it should operate the door.

If you still can't get it go to www.homelink.com & follow the
directions for "programming a garage door transmitter" & then for
programming rolling code.

Doordoc
www.DoorsAnd Openers.com

Reply to this Message

David Wells - 28 May 2005 16:00 GMT

Can anyone in Canada tell me if they got home link working with the
following model of LiftMaster security + Model 1280LMC-R unit I have
tried with the instructions from the home link web site still no go.

If any one has please tell me how you did it. I guess it is possible I
have a bad Homelink unit in my 2005 camry le.

Reply to this Message

Jim Jensen - 30 May 2005 13:40 GMT

> Can anyone in Canada tell me if they got home link working with the
> following model of LiftMaster security + Model 1280LMC-R unit I have
> tried with the instructions from the home link web site still no go.
>
> If any one has please tell me how you did it. I guess it is possible I
> have a bad Homelink unit in my 2005 camry le.

I'm not in Canada, but just got my new Camry homelink working with a Liftmaster 1280R. The first time, following the instructions, it didn't work. But I stumbled on a fix.

The instructions say after pressing the smart button on the opener, within 30 seconds press the homelink button in the car two times and, if the door doesn't open, press it a third time. That didn't work for me. So I repeated the procedure, but this time I pressed the homelink button FOUR times. The door opened and it's been working fine.

Give it a try. I'd be interested to now if it works.

Reply to this Message

David Wells - 30 May 2005 15:36 GMT

>> Can anyone in Canada tell me if they got home link working with the
>> following model of LiftMaster security + Model 1280LMC-R unit I have
[quoted text clipped - 8 lines]
>
>Give it a try. I'd be interested to now if it works.

Yes I have mine working also now. I called home link and they led me
through the programing for the system. As mine has Rolling code so had
to press the learn button on the top of the unit after using the
remote unit to start the programming and then like you jump back in
the car and hit the selected button twice. Thank for the responce.

Reply to this Message