I have an '85 truck with a recently rebuilt engine. The problem is, the
truck won't start unless I pour a little gas into the carb. What might
be the cause of this? It didn't do this before I rebuilt the engine.
thanks,
Mark in Austin
>I have an '85 truck with a recently rebuilt engine. The problem is, the
>truck won't start unless I pour a little gas into the carb. What might
>be the cause of this? It didn't do this before I rebuilt the engine.
make sure your choke is working.
make sure the float level is set properly.
make sure fuel isn't leaking out of the float bowl.
mrcheerful . - 30 Jul 2005 20:03 GMT
>>I have an '85 truck with a recently rebuilt engine. The problem is, the
>>truck won't start unless I pour a little gas into the carb. What might
[quoted text clipped - 3 lines]
> make sure the float level is set properly.
> make sure fuel isn't leaking out of the float bowl.
or you have a massive air leak, spray some carb cleaner around the
manifold/pipes (with it running) and see if the engine speed changes.
mrcheerful