Hi all,
I have 99 Tacoma 4x4 with a 5 speed manual trans and have a problem. When I
depress the clutch sometimes I get a vibration that will go away if I
depress and release the clutch a couple of times. While doing this I have to
leave the truck in gear and all the clutch has to do is start to engage then
it can be depressed again resulting in a smooth ride again, most of the
time. Sometimes I have to do it a few times.
Anyone have any ideas what might be causing this?
Thanks,
Hachiroku - 16 Nov 2005 01:18 GMT
> Hi all,
>
[quoted text clipped - 8 lines]
>
> Thanks,
Not sure, but my best guess is either a bearing is going, the clutch plate
is damaged, or a tranny or motor mount is loose or broken. If you're
lucky, it's one of the latter two...