toy rear window defroster

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

bigben - 25 Feb 2006 04:27 GMT

having trbl removing the clip from the defroster pad using repair kit that
says remove clip but not how clip in pad real tight any suggestions on
removal
for the guy who needs repair info go to www.frostfighter.com they sell
kits for the rear window defrosters and do provide great trouble shooting
instructions on line only trouble i have had with them is they don't
respond to your requests for on line help been wait two weeks for return
info
bigben

Reply to this Message

Ray O - 25 Feb 2006 04:43 GMT

> having trbl removing the clip from the defroster pad using repair kit that
> says remove clip but not how clip in pad real tight any suggestions on
[quoted text clipped - 5 lines]
> info
> bigben

If you are using conductive paint to repair scratches in the defroster grid,
you do not have to remove the clip unless the pad that holds the tab that
the clip attaches to broke off the glass. I believe the clip has toothlike
tabs to hold on to the tab. If the tab is not attached to the glass, you
may be able to fit a very small screwdriver like the kind you use to repair
eyeglasses to get the tooth off of the tab.

Signature

Ray O
(correct punctuation to reply)

Reply to this Message

bigben - 28 Feb 2006 02:50 GMT

Ray O thanks very much for info
will try that mafg of kit never responed to how
to remove cilp from pad guess they never did it
but make kits for both Vain & Pad Repair
bigben

Reply to this Message

Ray O - 28 Feb 2006 05:53 GMT

> Ray O thanks very much for info
> will try that mafg of kit never responed to how
> to remove cilp from pad guess they never did it
> but make kits for both Vain & Pad Repair
> bigben

What are you trying to repair? Did the terminal fall off of the grid or is
the grid just scratched? If the grid is scratched, there is no need to
remove the clip from the terminal.

Signature

Ray O
(correct punctuation to reply)

Reply to this Message