Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / UK Car Forums / 4x4 Cars (UK group) / June 2005

Tip: Looking for answers? Try searching our database.

HELP! discontinued part for frontera

Thread view: 
Enable EMail Alerts  Start New Thread
Thread rating: 
Amanda Lewis - 17 May 2005 17:20 GMT
Hi there,

I am in desperate need of help.  I have had my frontera 2.4l petrol engine
skimmed & tested for a gasket change.  The garage who are doing the work
gave the engine a good once over while it was apart and are happy with the
overall condition.

They discovered that a nylon "distributor drive" which sits in the engine
that the cog from the distributor sits in was about ready to disintegrate.
Was not a problem until we then discovered that Vauxhall have discontinued
the part and can't find one anywhere.

This was VAUXHALL PART 8930228 and described on their CD as "worm, gear,
dist drive"

I would have got a recon engine at the start but all the partfinder searches
and local engine reconditioners reckon they are hard to find.

I am therefore up sh** creek.  Either I find this part or find a whole new
engine (and take the loss of the skin and test which was already done) or
maybe even scrap the car (would be gutted as it also has an LPG conversion
and seams a bit excessive just for a small part.)

Can anyone help or point me in the right direction.

Any help or advice would be gratefully received.

Thanks in advance
Neil Jones
Badger - 17 May 2005 20:20 GMT
> Hi there,
>
[quoted text clipped - 25 lines]
> Thanks in advance
> Neil Jones

Hummm, if its the Isuzu engine you might do better trying them?
SteveG <\ - 17 May 2005 21:39 GMT
Take the old part to an engineering shop and get them to make one in
steel .. gotta be cheaper than a recon engine

Regards

Steve G

> Hi there,
>
[quoted text clipped - 25 lines]
> Thanks in advance
> Neil Jones
Rob - 18 May 2005 10:27 GMT
tried some of the vauxhall non dealer specialists

LMF???? and vauxspares.

theres plenty of places stocking discontinued parts these days speak nicely
to your local factor as well they normally have a good few sources

www.lmfvauchall.com
adder1969@yahoo.co.uk - 26 May 2005 15:58 GMT
SteveG <"s.goodfellow"@blueyonder wrote:
> Take the old part to an engineering shop and get them to make one in
> steel .. gotta be cheaper than a recon engine
>
> Regards
>
> Steve G

I had something like this disintegrate on an old vauxhall (camshaft
drive to the dizzy) but simply made one up using a bit of steel & a pin.
Halleys - 04 Jun 2005 16:35 GMT
> Hi there,
>
[quoted text clipped - 26 lines]
> Thanks in advance
> Neil Jones

I think this engine is the same as the 2.2 and 2 litre fitted to Manta, and
Omega/Rekord and the 3 litre Senator/Carlton/Monza engine has the same front
cover. Knowing Vauxhall parts system they will give each engine a different
part number for the same part.

Cheers

David
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread
Enable EMail Alerts
Rate this Thread



©2009 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.