stag style wheels

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

dave - 09 May 2009 17:25 GMT

need 10 of these not bothered about the condition, anyone got any leads.
TIA
dave

Signature

I only please one person per day. Today is not your day. Tomorrow isn't
looking good either. - Scott Adams

Reply to this Message

Badger - 11 May 2009 17:18 GMT

> need 10 of these not bothered about the condition, anyone got any leads.
> TIA
> dave

Is it simply stag fitment, or stag lookalike? I have a set of alloys that
came off my stag, they are non-original - not sure of make but standard 14"
and a sort of multi-vane style. Nothing wrong with them, I just didn't like
the look of them on the car! They're in the North of Scotland, I'm not
looking for an awful lot for them, if you're interested?
Badger.

Reply to this Message

dave - 11 May 2009 17:37 GMT

after the steel wheels, i've since been told that they are on the mk1. got
stag alloys on the pi at the mo but want a 14x5.5 steel and have been told
the mk1 stag are that size.
cheers
dave

>> need 10 of these not bothered about the condition, anyone got any leads.
>> TIA
[quoted text clipped - 6 lines]
> not looking for an awful lot for them, if you're interested?
> Badger.

Reply to this Message

Rob - 12 May 2009 01:05 GMT

>> need 10 of these not bothered about the condition, anyone got any leads.
>> TIA
[quoted text clipped - 6 lines]
> looking for an awful lot for them, if you're interested?
> Badger.

Just as a point of interest the wheels on the Dolomite Sprint which are
13" alloy (same pattern as your looking for) are not recommended for the
Dolomite as the alloys are supported off the centre spigot of the hub.
They have stepped alloy wheel nuts that will not support the rim.

Thats from a Triumph service bulletin.

Suggest you do take this into consideration when selecting the rim that
your looking.

Reply to this Message