Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Volvo Cars / September 2004

Tip: Looking for answers? Try searching our database.

1981 244 GL & 1976 244 GL re. parts interchangeability

Thread view: 
Enable EMail Alerts  Start New Thread
Thread rating: 
m.244GL.au - 10 Sep 2004 12:55 GMT
Hello.

I'd like to know if the 1981 244 GL external parts and 1976 244 GL external
parts are interchangeable.
I'd like to replace cracked rear light plastic covers to start with, and if
the parts are interchangeable I might get an engineless 1976 244 GL, which I
can get very cheap - though, I haven't seen the Car as yet.

I should be grateful if any of owners/mechanics out there would direct me to
the right direction.

Thank you.

m.244GL.au
Mike F - 10 Sep 2004 13:17 GMT
> Hello.
>
[quoted text clipped - 10 lines]
>
> m.244GL.au

The taillights on the '81 will wrap around the corner, on the '76
they'll just be flat, so they won't work.  I'm not sure about the
configuration in Australia, but I think that the front will be
completely different as well.

Signature

Mike F.
Thornhill (near Toronto), Ont.

NOTE:  new address!!
Replace tt with t (twice!) and remove parentheses to email me directly.
(But I check the newsgroup more often than this email address.)

m.244GL.au - 10 Sep 2004 15:13 GMT
>> Hello.
>> I'd like to know if the 1981 244 GL external parts and 1976 244 GL
[quoted text clipped - 9 lines]
>> the right direction.
>> Thank you.

> The taillights on the '81 will wrap around the corner, on the '76
> they'll just be flat, so they won't work.  I'm not sure about the
> configuration in Australia, but I think that the front will be
> completely different as well.

Thank you for your reply, Mike.
I should have done Google Images search!
1976 has round head lights, and 1981 has square ones.
I'll call in to wreckers tomorrow to see if they have those brake light
covers.
Thanks again, Mike. :)

m.244GL.au
athol - 11 Sep 2004 01:54 GMT
>> I'd like to know if the 1981 244 GL external parts and 1976 244 GL external
>> parts are interchangeable.
>> I'd like to replace cracked rear light plastic covers to start with, and if
>> the parts are interchangeable I might get an engineless 1976 244 GL, which I
>> can get very cheap - though, I haven't seen the Car as yet.

>> I should be grateful if any of owners/mechanics out there would direct me to
>> the right direction.

> The taillights on the '81 will wrap around the corner, on the '76
> they'll just be flat, so they won't work.  I'm not sure about the
> configuration in Australia, but I think that the front will be
> completely different as well.

My news server seems to be playing up ATM - I haven't yet seen the
original post.

1981 was the first year of plastic bumper bars.  The front guards,
indicators, headlights and grille are all different to earlier
models.  The tail changed in 1979, so the bootlid, taillights, etc.
are all different.

To top it off, around 1978 or 1979, Volvo changed their door locks,
making the doors incompatible between vehicles before and after the
change.

In summary, about the only external panel that is likely to be the
same between the '76 and '81 is the bonnet.

Oh, and the dashboard changed in '81.  The dash shell is a different
shape and all of the gauges are different.

A few small internal parts such as the headrests on the seats are
the same between '76 and '81.  The cloth trim seems to have changed
in about 1979, so interior trim is unlikely to interchange.  I must
admit that all of mine are cloth trim, so I don't know if the vinyl
or leather trims were the same over the years.

The mechanicals also changed a number of times over those years, so
I don't expect that a '76 244 would even be much use for mechanical
parts!  Different sway bars, front struts (wheel bearing size),
lower control arms (later are more reinforced), etc..  The rear
axle and suspension are the same, though!

Signature

Athol
<http://cust.idl.com.au/athol>
Linux Registered User # 254000
I'm a Libran Engineer. I don't argue, I discuss.

m.244GL.au - 11 Sep 2004 14:30 GMT
>>> I'd like to know if the 1981 244 GL external parts and 1976 244 GL
>>> external
[quoted text clipped - 12 lines]
>> configuration in Australia, but I think that the front will be
>> completely different as well.

> My news server seems to be playing up ATM - I haven't yet seen the
> original post.
[quoted text clipped - 19 lines]
> lower control arms (later are more reinforced), etc..  The rear
> axle and suspension are the same, though!

G'day, Athol.
Thank you for your reply.
Now I know I'll need to look for only 244s manufacturered after 1981.. :)

m.244GL.au

PS. Re. newsgroup server(s), my original didn't get "published" on my server
for at least 2 hours, when I see mine, Mike F. already replied my original..
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread
Enable EMail Alerts
Rate this Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.