Exchange dash bulbs V/S40

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

Martijn - 07 Mar 2005 21:08 GMT

My lightbulbs are failing one at a time. It's the bulbus behind the air
controls. Doe anyone know how to replace tham without damageing the dash.

Any advise is appreciated.

All the best,

Martijn
V40TD
240GL
262C
144DL

Reply to this Message

Erik Lid?n - 08 Mar 2005 00:18 GMT

> My lightbulbs are failing one at a time. It's the bulbus behind the air
> controls. Doe anyone know how to replace tham without damageing the dash.
[quoted text clipped - 8 lines]
> 262C
> 144DL

If you have ECC, do like this:
1. Pull the knobs off, straight out.
2. Unscew all visible screws to get the panel off.
3. Change the bulbs.

If you don't have ECC I don't know if you does it this way.

/Erik Lid?n

Reply to this Message

Martijn - 08 Mar 2005 19:53 GMT

Erik,

Thanks for your reply. I donnot have what you call "ECC", it's with knobs so
not electronic.
I did manage to remove the knobs but cannot reach the bulbs with "standard
articulated fingers" .

Any ideas?

Cheers,

Martijn

>> My lightbulbs are failing one at a time. It's the bulbus behind the air
>> controls. Doe anyone know how to replace tham without damageing the dash.
[quoted text clipped - 17 lines]
>
> /Erik Lid?n

Reply to this Message