245 Speedometer problem (other end this time)

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

Clay - 29 Jun 2005 00:04 GMT

Can I change the speedo cable without changing the housing? Pull the old
cable out and snake a new one in?
Good time to go after that odometer gear while I'm in there...

My speedometer quit working accompanied by a puddle of ATF on the
ground. Figured the cable came loose at the tranny.
Nope, broke off at the tranny. (what's up with a plastic part connecting
the cable to the trans?)
Evidently a transmission mount broke which allowed the back of the trans
to flop around and whack the speedo cable.

'83 245, ~ 230K (odo don't go no mo')

Reply to this Message

Mike F - 29 Jun 2005 13:40 GMT

> Can I change the speedo cable without changing the housing? Pull the old
> cable out and snake a new one in?
[quoted text clipped - 8 lines]
>
> '83 245, ~ 230K (odo don't go no mo')

Yes, if you get an inner the correct length. I remember buying one many
years ago to fix the speedo cable on my '71 that was longer than needed
with a crimp on end. Just cut to the correct length, crimp, and you're
done.

Signature

Mike F.
Thornhill (near Toronto), Ont.

Replace tt with t (twice!) and remove parentheses to email me directly.
(But I check the newsgroup more often than this email address.)

Reply to this Message

Rate this thread: