> The muffler/exhaust system on my '86 volvo 240 appears to have come
> loose from its normal position - the tailpipe sticks too far out from
[quoted text clipped - 8 lines]
> before i tried to bend the exhaust system up to the pin. any
> help/guidance is much appreciated.
Yeah you're on the right track, the pipe or muffler inlet probably bent
slightly from it hanging like that. I usually lie on the ground and use my
leg to wedge the muffler up and then hook the rubber mount on, I've had that
same thing happen a couple times though usually it's the rubber that's
broken.
Mike F - 15 Jul 2005 13:15 GMT
> > The muffler/exhaust system on my '86 volvo 240 appears to have come
> > loose from its normal position - the tailpipe sticks too far out from
[quoted text clipped - 16 lines]
> same thing happen a couple times though usually it's the rubber that's
> broken.
What ususally happens is one of the joints at the front muffler or
catalytic convertor is a little loose. These can rotate when the rear
muffler hangs down like that.

Signature
Mike F.
Thornhill (near Toronto), Ont.
Replace tt with t (twice!) and remove parentheses to email me directly.
(But I check the newsgroup more often than this email address.)