960 driveshaft

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

shawnews - 31 Jul 2005 04:56 GMT

My 960 have had some noise during acceleration from stand still and also
some vibration driving more than 100k/h. I replaced the centre support and
the bearing in the driveshaft, but there is not much change. I check again
the driveshaft again and I noticed that the U-joints are not align the same
way as the book for 740 specified.
I don't have book for 960. Should the alignment be the same for 960 as for
740 driveshaft?

Reply to this Message

Mike F - 03 Aug 2005 14:45 GMT

> My 960 have had some noise during acceleration from stand still and also
> some vibration driving more than 100k/h. I replaced the centre support and
[quoted text clipped - 3 lines]
> I don't have book for 960. Should the alignment be the same for 960 as for
> 740 driveshaft?

http://www.brickboard.com/FAQ/700-900/Driveline.htm

Signature

Mike F.
Thornhill (near Toronto), Ont.

Replace tt with t (twice!) and remove parentheses to email me directly.
(But I check the newsgroup more often than this email address.)

Reply to this Message