Help w/ 850 computer codes

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

caaron - 07 Nov 2005 19:01 GMT

I have a 94 850 non-turbo. I'm getting the following codes and need help
interpreting them:

A6 Ignition: 1-1-1 1-2-2 and 2-3-1 (I thought 1-1-1
meant OK, but then the other 2 codes came up)
B2 Cruise Control: 1-2-2

Any help would be appreciated.

Thanks,

Chuck

Reply to this Message

Per Hauge-Nielsen - 07 Nov 2005 20:29 GMT

>I have a 94 850 non-turbo. I'm getting the following codes and need help
>interpreting them:
[quoted text clipped - 8 lines]
>
> Chuck

Asuming you have a Fenix 5.2 controlled engine:

A6 1-2-2 : Faulty air temp. signal
A6 2-3-1: long term fuel fuel trim part load, lower limit.
Possible source:
-High fuel pressure.
-Leaking injector.
-Dirty engine oil.
-Oil level too high.
-Leaking EVAP valve.
-Faulty sensor signals.

The B2 1-2-2
is normal if vehicle speed has not exceeded 35 km/h after ignition has been
switched on.

Regards

Per Hauge

Reply to this Message

caaron - 07 Nov 2005 20:47 GMT

Thanks, Per. Very helpful.

Chuck

>>I have a 94 850 non-turbo. I'm getting the following codes and need help
>>interpreting them:
[quoted text clipped - 28 lines]
>
> Per Hauge

Reply to this Message