92 960 remove tilt handle

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

repairrookie - 10 Dec 2005 21:49 GMT

while trying to replace the ignition switch i ran into a problem. To get off
the bottom part of the cover around the column I must first remove the
steering tilt handle. I was able to push the tilt button down far enough to
remove one screw off of the back side. it looks like there is one more screw
holding the plastic cover on but i cant get to it. any ideas? I'm stumped.
Is there any way to release that tilt arm without taking off the plastic
cover?

Reply to this Message

User - 11 Dec 2005 02:31 GMT

> while trying to replace the ignition switch i ran into a problem. To get off
> the bottom part of the cover around the column I must first remove the
[quoted text clipped - 3 lines]
> Is there any way to release that tilt arm without taking off the plastic
> cover?

There's a setscrew that you can remove through a hole in the cover.

Bob

Signature

The goal when driving is to miss the maximum number of objects.

Reply to this Message