 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
Car Forum / Volvo Cars / January 2006240 Oil pressure questions
Hi folks, Does anybody happen to know the thread size for the oil pressure switch? I want to install an oil pressure gauge and I need to buy the sender. I already have the gauge, it reads from 0 to 3 bar, will this be adequate? (It is a genuine Volvo 240 gauge, so I'm assuming it will...) Many thanks, David > Hi folks, > [quoted text clipped - 7 lines] > > David Just go to a junkyard and get a 3 bar sender from another 240, or a 5 bar sender and guage, the two have to be matched. I installed one in my 245 I bought a dual one, it has a low pressure switch for the light and a sender for the gauge. You will also need an adapter M 14X1.5 to 1/8 NPT the numbers on my sender is 360 009D (80PSI) and the adapter p/n is R7963 check out this site: http://www.egauges.com/vdo_send.asp?Sender=80PSI_5Bar_VDO&Cart= > > Hi folks, > > [quoted text clipped - 10 lines] > Just go to a junkyard and get a 3 bar sender from another 240, or a 5 > bar sender and guage, the two have to be matched. I installed one in my 245 I bought a dual one, it has a low pressure switch for the light and a sender for the gauge. You will also need an adapter M 14X1.5 to 1/8 NPT the numbers on my sender is 360 009D (80PSI) and the adapter p/n is R7963 check out this site: http://www.egauges.com/vdo_send.asp?Sender=80PSI_5Bar_VDO&Cart= > Hi folks, > [quoted text clipped - 7 lines] > > David |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2008 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.