> My 740 mast was shot so I replaced the mast with a new one ,still no signal
> ,but a simple old rubber mast works great .What is there to mess up on the
> electrical mast please .IT WORKS FINE but no signal except on fm of course .
The mast needs to make contact with a sleeve, which makes contact with
the antenna body which is connected to the signal cable. Check the
resistance with an ohmmeter between the tip of the signal cable and the
tip of the mast. Fix as necessary, resistance should be close to zero.

Signature
Mike F.
Thornhill (near Toronto), Ont.
Replace tt with t (twice!) and remove parentheses to email me directly.
(But I check the newsgroup more often than this email address.)