The heater only works on position 4.
The aircon compressor cuts in and out when you switch it on.
Any ideas?
Thanks
> The heater only works on position 4.
> The aircon compressor cuts in and out when you switch it on.
> Any ideas?
> Thanks
You're describing 2 problems.
The heater motor resistor or power controller is bad (it's switched out
of the circuit at top speed).
The refrigerant charge is low, you have a leak somewhere.

Signature
Mike F.
Thornhill (near Toronto), Ont.
Replace tt with t (twice!) and remove parentheses to email me directly.
(But I check the newsgroup more often than this email address.)