 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
Car Forum / Volvo Cars / August 2006Fuel pump question ['83 245]
Still chasing my starting troubles. (I can't get a harness from Dave until next week...) If I disconnect the yellow wire connector under the rear seat (main fuel pump wires) and put a meter on the ground and yellow wire the meter shows zero. When I spin the motor, the meter shows 12V. Seems like this would indicate the wiring, relays, etc. to the main pump are good. If I jumper 12V to the yellow wire going to the pump, the pump does not run. Do I have a bad pump? > Still chasing my starting troubles. (I can't get a harness from Dave > until next week...) > > If I disconnect the yellow wire connector under the rear seat (main fuel > pump wires) and put a meter on the ground and yellow wire the meter > shows zero. That's what you want; the circuit isn't energized. > When I spin the motor, the meter shows 12V. Again, what you want: circiit is energized from fuel pump relay. > Seems like this would indicate the wiring, relays, etc. to the main pump > are good. Yes. > If I jumper 12V to the yellow wire going to the pump, the pump does not run. > Do I have a bad pump? Almost certainly. Either a shot pump, a bad ground wire/connection from the fuel pump to the car, or a bad connection at the pump itself. >... >> If I jumper 12V to the yellow wire going to the pump, the pump does not run. [quoted text clipped - 4 lines] > Either a shot pump, a bad ground wire/connection from the fuel pump to > the car, or a bad connection at the pump itself. I pulled the pump and put 12V right to the lugs. It twitched like it wants to run but nothing. Beat it on a rock but it still doesn't run. Time for a new one. New pump and it runs... I put an aftermarket one on it until I can order a Bosch unit. One word of caution, I read the fuel pumps were only meant to run submerged in fuel and one should not try and put power or "spin" one with it out of the tank and fuel. Also, you don't want to spin it in the tank by applying a meter that could spark. > New pump and it runs... > I put an aftermarket one on it until I can order a Bosch unit. > One word of caution, I read the fuel pumps were only meant to run > submerged in fuel and one should not try and put power or "spin" one > with it out of the tank and fuel. Also, you don't want to spin it in > the tank by applying a meter that could spark. I test pre-pumps in a tub of water, yes it sounds like a bad idea to put something electrical in water but it beats it catching fire from fuel vapor and it's easy enough to spray some WD-40 in it to displace the water if the pump does in fact still work. |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2008 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.