blinker question

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

Uncle Vinnie - 29 Dec 2006 14:25 GMT

RE: 98 S70

Where is the turn signal (relay/blinker) located?

Problem just started, sometimes the directionals blink, sometimes they don't
at all...my guess, the blinker is on it's way out...

I've removed the radio, and the compartment under the coin holder.. so it
must be just behind the hazard flasher..how do you get into there? Am I
wrong, is it elsewhere?

thanks!

Signature

B'rgds,

Vinnie

Reply to this Message

Glenn - 30 Dec 2006 21:33 GMT

> RE: 98 S70
>
[quoted text clipped - 8 lines]
>
> thanks!

The relay is built in the hazard switch
Glenn

Signature

"*-344-*Never Forgotten"
Is for the New York City Firemen who lost their lives on September 11,2001.
The official count is 343, but there was also a volunteer who lost his life
aiding in the initial rescue efforts. And I will never forget them as
long as I live,
nor should any American.

Reply to this Message

Uncle Vinnie - 31 Dec 2006 16:19 GMT

Thanks Glenn, I had a feeling it was in there somewhere... question, how do
you get in there? Radio compartment or storage- I must be missing
something!

Signature

B'rgds,

Vinnie

>> RE: 98 S70
>>
[quoted text clipped - 11 lines]
> The relay is built in the hazard switch
> Glenn

Reply to this Message

Peete - 01 Jan 2007 23:51 GMT

Just remove the ashtray and you will be able to push the hazard light
button assembly in and pull it out through the bottom.

Peete

Reply to this Message

Mike F - 05 Jan 2007 13:42 GMT

> Thanks Glenn, I had a feeling it was in there somewhere... question, how do
> you get in there? Radio compartment or storage- I must be missing
[quoted text clipped - 4 lines]
>
> Vinnie

If you pull out the radio, there's a hole in the bottom of the radio
box. Sticking your finger through this hole allows you to dislodge the
hazard switch from its mount, then you can easily pull it out and
disconnect the wiring.

Signature

Mike F.
Thornhill (near Toronto), Ont.

Replace tt with t (twice!) and remove parentheses to email me directly.
(But I check the newsgroup more often than this email address.)

Reply to this Message

Uncle Vinnie - 05 Jan 2007 14:12 GMT

Thanks Mike.. that clears things up a bit! I'll get back in there again!

Signature

B'rgds,

Vinnie

>>
>> Thanks Glenn, I had a feeling it was in there somewhere... question, how
[quoted text clipped - 11 lines]
> hazard switch from its mount, then you can easily pull it out and
> disconnect the wiring.

Reply to this Message