850 door check

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

c.fiedler@sbcglobal.net - 31 Jan 2007 00:13 GMT

About a year ago I had to have a new door check installed in the
driver's door of my '97 850. Recently it began popping and I took it
to the dealer. Seems they had to pull the door and weld things which
did fix the problem.

As I intend to keep this car for the foreseeable future, I'm concerned
that this fairly pricey fix will have to be redone again in the
future.

Anybody have any definitive experience in this area?

TIA.

Chuck Fiedler
Nothing but Volvo since 1974

Reply to this Message

XR(V) - 31 Jan 2007 20:38 GMT

> About a year ago I had to have a new door check installed in the
> driver's door of my '97 850. Recently it began popping and I took it
[quoted text clipped - 11 lines]
> Chuck Fiedler
> Nothing but Volvo since 1974

Rather common problem on 850-70 series yes.
Same side usually does not break again after fix.

XR(V)
Sweden

Reply to this Message

Mike F - 01 Feb 2007 13:28 GMT

It all depends on the welder - if the job is done correctly, there
should be no repeat. However, the door stops is a bit of a weak point
on the body, so try not to open the door and slam it up against the
stop.

Signature

Mike F.
Thornhill (near Toronto), Ont.

Replace tt with t (twice!) and remove parentheses to email me directly.
(But I check the newsgroup more often than this email address.)

Reply to this Message