Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Volkswagen / Water Cooled Volkswagen Cars / November 2008

Tip: Looking for answers? Try searching our database.

85 vanagon heat

Thread view: 
Enable EMail Alerts  Start New Thread
Thread rating: 
Kafertoys@aol.com - 08 Nov 2008 13:26 GMT
i have a vanagon that is getting no heat even after taking the system
apart and replaceing the rubber hoses front to back and thermostat. I
have also blown ait thru the heater core to see it was clear.

now to feel foolish (lol) this has an 86 golf engine, that has powered
the vangon for over a year just great but now heat would be nice.

could it bet water pump is not strong enough? does the tyco(sp) kit
use something different?
try - 08 Nov 2008 22:22 GMT
> i have a vanagon that is getting no heat even after taking the system
> apart and replaceing the rubber hoses front to back and thermostat. I
[quoted text clipped - 5 lines]
> could it bet water pump is not strong enough? does the tyco(sp) kit
> use something different?

Had same problem. Fix was to bleed the system. Park on a steep hill or
jack the front up as high as possible. Let the engine cool down.Remove
the front grill and loosen the bleed bolt on top of the radiator. Make
sure that the fill tank is full, start the engine and keep an eye on the
bleed bolt and overflow tank (opposite ends of the van 8^). As soon as
the air stops bubbling out of the bleed bolt (solid stream of coolant
comes out), tighten the bolt down. If the engine gets warm, do NOT open
the overflow tank cap to top off the coolant level. You get a face full
of hot coolant if you do (Don't ask how I know.)

WheatShucker
Kafertoys@aol.com - 09 Nov 2008 12:40 GMT
Thanks  I did that just after I put the vanagon togther.  wasn't sure
if the heat system was going to have me doing it again.

> Had same problem. Fix was to bleed the system. Park on a steep hill or
> jack the front up as high as possible. Let the engine cool down.Remove
[quoted text clipped - 7 lines]
>
> WheatShucker
try - 12 Nov 2008 20:27 GMT
> Thanks  I did that just after I put the vanagon togther.  wasn't sure
> if the heat system was going to have me doing it again.
[quoted text clipped - 10 lines]
>>
>> WheatShucker

Forgot to add: Make sure that the dash heater control is all the way open.

-Bob
caroline - 09 Nov 2008 20:34 GMT
>i have a vanagon that is getting no heat even after taking the system
> apart and replaceing the rubber hoses front to back and thermostat. I
[quoted text clipped - 5 lines]
> could it bet water pump is not strong enough? does the tyco(sp) kit
> use something different?

Could it be something as simple as a problem with the cable that operates
the heater tap?....a common enough problem.

It lives under the spare wheel so you need to remove the wheel and open the
heater tap manually.  You may as well leave it in that position for the
winter.
pfjw@aol.com - 10 Nov 2008 16:51 GMT
> Could it be something as simple as a problem with the cable that operates
> the heater tap?....a common enough problem.
>
> It lives under the spare wheel so you need to remove the wheel and open the
> heater tap manually.  You may as well leave it in that position for the
> winter.

Yep, either the valve or it needs to be burped. At the very least
burped - TRY has that part covered nicely. Then the valve.

For the record, if you do get the heat running and leave the valve
wide-open, it can get pretty oppressively warm inside. Eventually you
will want to get that valve functioning properly if it is not now.

While you are at it, pay attention to the hoses and if an automatic,
pay *ACUTE* attention to the transmission-oil cooler. Transmission oil
cooler failure = new transmission + new radiator + new hoses all
around.

Peter Wieck
Melrose Park, PA

Peter Wieck
Melrose Park, PA
caroline - 13 Nov 2008 13:43 GMT
>>i have a vanagon that is getting no heat even after taking the system
>> apart and replaceing the rubber hoses front to back and thermostat. I
[quoted text clipped - 12 lines]
> the heater tap manually.  You may as well leave it in that position for
> the winter.

So, was this info of any use to you?

Or are you too busy playing about on RAMVA?
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread
Enable EMail Alerts
Rate this Thread



©2009 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.