We are thinking about buying another Wrangler (Unlimited X) since the
wife wants power windows and locks and has wanted them for over 20 years
on her Jeep.
Trying to decide if we should buy a 2008 or wait for the 2009s. I am

Hey List,
I had a lady email me through my WWII Jeep website.  She is cleaning up some
property and on this property sit 14 or so old jeeps. Cj-2a, maybe 3A's, CJ-5,
M38A1    all sorts of jeeps in their natual habitat... LOL  most covered with

Good day,
I drove into a parking garage today after driving 50 miles on the freeway
and parked the 2001 Grand Cherokee Laredo. On my return later I found that
the car doesn't work. None of the gages (Jeep's spelling) seem to activate

Hard to get off Spark Plug Boots
If you ever have a spark plug boot that is hard to get off one way
that has worked good for me is to take a 2-3 foot 3/16 brake line and
screw it into a air nozzle and then file the end of the line to look

JustAutoParts - a place to find automotive parts and technical advice.
This is the place to find automotive parts, help and advice for the
best prices on the web. Also find technical advice, tips and tricks
everyone working on a car needs to know.

While wheeling a few days ago, the jeep was at an extreme angle and
the engine was about to stall. I was driving off a ledge using the
brakes.  I realeased the brakes to see if the Jeep would roll forward
a bit and then when I pressed on the brake pedal again it went to the

Excel Auto Mirror Manufacturer is a profesional manufacturer for
various rear-view mirror of bus, truck & sedan and any size lens of
auto & motorcycle mirrors. We also can manufacture auto mirror with
your own design.

sir,
i know you hate diesel engines in light vehicles for fear of pollution.  in
addition to purchasing an '01.5 cummins powered dodge this week (for a work
truck), i also purchased a 2008 cummins powered dodge ram with the 6.7 liter

Have had the MPFI on my CJ-7 for several years.  Very satisfied.  Problem is,
have moved to CA from TX - in CA they test for NOX - CO and CO2 readings are
excellent - failed NOX.  Tester (reliable; actually a "Referee" )said the
engine was running too lean, thus failed NOX.  Looking ...

Folks,
My mechanic, the one who just solved the Death Wobble problem I've had
with my '97 Wrangler, tells me that the front trailing arm bracket is
about to fail. He says he can see through it and then tells me not to

This past weekend i had my Jeep blessed at the blessing of the Jeeps
here in Mi.
 A little over an hour into my trip i watched my clutch peddle go to
the floor. I was on the highway doing 65/70 the whole time. I down

Finally!
The lift Kit has been installed :p
See pic in a.b.p.a.4x4
It's only been a day and a half, but so far, so good.