JustAutoParts - a place to find automotive parts and technical advice.
This is the place to find automotive parts, help and advice for the
best prices on the web. Also find technical advice, tips and tricks
everyone working on a car needs to know.

I have a 97 Olds Silhouette. The other day when backing out of the garage, I
put it in reverse and it didn't seem to engage, I then put it in neutral and
then drive and it wouldn't engage. I put it in park for a bit and back in
reverse, still would not engage, I gave it some gas ...

Does anyone know why the G8 is governed at a paltry 135 mph? My '00 SSEi has
121 fewer horsepower and will do 130. Seems very low for this car, I was
expecting 145-150.
Lee

Anyone know what size hex wrench I need for the front disc brakes on a 1998
Pontiac Grand Am?
joe

Does continual shifting from drive to neutral and back cause any
long-term damage?
What I mean is continually shifting into neutral when approaching stop
signs and red lights?

Best Auto Repair Software / OBDII Code DB
Autotree Pro Ver. 1.45 is a 32 Bit ( WIN95-XP) software Application
for automotive diagnostics. The program written in a Tree format to
make systematic and quick diagnostic checks a breeze, organized by

My brother and I just spent a lot of time troubleshooting a problem
with my 2001 Pontiac Grand Prix GTP. The ABS (anti-lock braking
system), the TCS Off (traction control system) and the service engine
soon warning lights were all illuminated on the dash.

We can Officially make this public now...I've seen it discussed in
previous threads.
Hello, my name is Mark Pavey; I am the Service and Parts Director at
Scott Chevrolet-Pontiac-GMC at 3333 Santa Anita Ave.  El Monte, CA

ABS INOB light is on.
Brake light is on.
Major clunk when trans shifts from 2 to 3rd.
Battery lights comes on once in awhile.

I need the 2 small brackets that connect the front bumper stablizer
bushings to the radiator core support.

So I found a site the other night that has all my gear on the same
site but their prices were really good for my understanding, please
let me know what you think...  http://www.motorspot.com

I have a 1988 Camaro RS with a 2.8 MPFI and I am planning to swap the V6
for a 350 with a carb.My question is...can I use the same fuel tank/pump
with a regulator to lower the fuel pressure? Or will I need to change
the tank to one for a carb?

I think my 1988 Camaro RS 2.8 has a MAF for a V8 on it.Are they
different? How would the V6 run with the V8 MAF on it?

Congrads to GM again for blowing this one!
No new Firebird....means...a Freaking MUSTANG?
The Horror, the horror!!!
http://www.nbc.com/Knight_Rider/

GT Auto
Gold
78000 miles
Very good condition - BUT has engine noise.

viens visitez le site du gratuit !!!!!!!!
http://www.cdugratuit.perso.st

Im in the process of reconstructing the front end of my 1987 4cyl
fiero. Hit a deer. Ive banged out most of it but i need to replace
bumper cover reinforcement and radiator reinforcement panel. If you
guy have either of these extra and could be removed please tell me if

Dear Friend,
I know all about your worries. That's because I was once in that same situation.
   * Not knowing how to pay my next bill
   * Detesting the job I am forced to do

Daytona time is almost here

I'm trying to get some basic, "Fiero 101" information to determine
whether I could, or should, consider getting a Fiero at this time. I had
one of the 1984 4-cylinder models, and I enjoyed driving it more than
any other car I have owned, despite its relatively crude suspension.  ...

A call for all who check this newsgroup to see if we can
generate some usage so it doesn't go away.
If you see this message, will you please reply with
something?