Re: 1995 90 rear bearings

You are accessing this site in a read-only mode. For full access to all member benefits, including message posting, please login or register. Registration is completely free, simple, and takes only a few seconds.

The message you are replying to and its parents are listed in the reverse order with the most recent posts first. This might not be the whole discussion thread. To read all the messages in this thread please click here.

Re: 1995 90 rear bearings

tpow

17 Jun 2008 21:02

> What is the trick to removing the rear wheel bearings? 12ton press does
> not begin to press it out.
> Was able to press the hub out. Just not the bearing.
>
> Torch to me, is the last resort.

I can advise, pressure and heat together. The hub has to be expanded. Just
done a Nova front which has been in for 16 years, took a 25 Ton toe jack and
butane blow torch. After about 5 minutes of heat and constant load the
bearing just popped out.............The bearing would not move with 25 ton
alone.

Bill	17 Jun 2008 14:28
What is the trick to removing the rear wheel bearings? 12ton press does not begin to press it out. Was able to press the hub out. Just not the bearing. Torch to me, is the last resort.

Quick links: