Re: BMW reset tool

You are accessing this site in a read-only mode. For full access to all member benefits, including message posting, please login or register. Registration is completely free, simple, and takes only a few seconds.

The message you are replying to and its parents are listed in the reverse order with the most recent posts first. This might not be the whole discussion thread. To read all the messages in this thread please click here.

Re: BMW reset tool

Josh Assing

26 Nov 2006 02:41

> Which leads me to ask: what exactly is the reset tool mentioned in the
>books, and how is it used?

I doubt seriously a reset would sove your temp problem.

The reset tool does nothing more than reset the dash countdown-lights for
"service 1" and "service 2" and oil changes and the CheckEngine light.

Some of the reset tools also read the code for the CheckEngine light.

It can, if equiped, also reset SRS lights.

--- AntiSpam/harvest ---
Remove X's to send email to me.

Carl McIver

26 Nov 2006 02:01

I have an 84 733i, and I've been working on fixing several of the
problems in the car. One of the last ones that immediately concern me is
the temperature gauge, which doesn't budge. The sender is good, the
indicator is good (passed some current through it,) and I can "see" the
sender from the connector going to the instrument panel, so there is a loss
of the signal inside the panel. The wiring diagram shows a component in
between the connector and the indicator, (forgot exactly what it was called,
and the book is out in the car right now) so I would like to check that out.
I assume that it's the chip where the signal is disappearing, and was
wondering if by chance a reset might correct the situation.
Which leads me to ask: what exactly is the reset tool mentioned in the
books, and how is it used?

Quick links: