Re: Dodge neon Change engine won't start

You are accessing this site in a read-only mode. For full access to all member benefits, including message posting, please login or register. Registration is completely free, simple, and takes only a few seconds.

The message you are replying to and its parents are listed in the reverse order with the most recent posts first. This might not be the whole discussion thread. To read all the messages in this thread please click here.

Re: Dodge neon Change engine won't start

Mhzjunkie

25 May 2006 17:53

mjengebretson spewed out this bit, and i'll scatter a few bits myself

> Replace engine with used but good engine not able top get it started.
> do I have to reset computer with new update for change in engine.

One mistake I made when changing an engine in a 94 intrepid, I used the
wiring harness that came with the engine I bought because I figured it would
be the same. I just plugged the new engine harness into the large plug
onside the shock tower, and it wouldn't start. I had to remove and install
the wiring harness from my old engine, and it fired right up.

If your engine was running before the swap then it's either that or you've
not got every thing plugged back in. Else start swapping out things from
your old engine over to the new one (crank sensor and so on). You don't have
to reset the computer.

Signature

Mhzjunkie

1 PRINT "Windows XP ERROR"
GOTO 1
END

mjengebretson	25 May 2006 16:03
Replace engine with used but good engine not able top get it started. do I have to reset computer with new update for change in engine.

Quick links: